With a 293Wh power capacity, Jackery Explorer 300 Portable Power Station can power small appliances and charge up to six smart devices at once. It provides a super fast recharge time of 2.5 hours using the combination of a 90W wall charger and a 60W USB-C PD Charger. Featuring a pure sine wave inverter, and built-in BMS, the power station protects sensitive devices while charging.
Updated Multifunctional Outputs
With a power capacity of 293Wh, the Jackery Explorer 300 Portable Power Station can power small electrical devices like drones, mini-coolers, TVs, CPAP machines and so on. The updated multifunctional outputs, including two pure sine wave AC outlets, a 60W type C PD port, and a QC 3.0 port, help you power six smart devices simultaneously.
Light (5W)
24 H
Camera (8.4W)
13 Charges
Bluetooth Speaker (350W)
19 H
Phone (18W)
16 Charges
CPAP (28W)
7 H
Electric blanket (55W)
4 H
Drone (90W)
5.8 ChargesRunning Time Simulator
To power with Explorer 300 (293Wh Capacity)
Please enter the wattage of the appliance (not exceeding 300W)
W
0
Hrs
3 Different Charging Modes
3 Different Charging Modes
Long-Lasting Power Solution
Excellent BMS Protection
Excellent BMS Protection
Portable and Stylish
Easy-to-use and Reliable Power
Easy-to-use and Reliable Power
Eco-Friendly Quiet Power Solution
6 Months Warranty
6 Months Warranty
0
Hrs
Recharging Time
0
Wh
Sustainable Energy Saving
PREPARING YOUR SOLAR GENERATOR
The Explorer 300 can be recharged under straight full sun in 3.5 hours from 0-80% by connecting a SolarSaga 100W solar panel.
Solar recharging steps:
1. Find the DC interface on the back of SolarSaga 100;
2. Connect the DC interface of SolarSaga 100 with DC input of Explorer 300
Notes:
1. Solar panel types and quantity depends on your purchase.
2. Buy 2 SolarSNotes:
1. Solar panel types and quantity depends on your purchase.
2. Buy 2 SolarSoga, get 1*Solar Panel Connectors.
3. Buy 4 or 6 SolarSoga, get 2*Solar Panel Connectors.oga, get 1*Solar Panel Connectors.
3. Buy 4 or 6 SolarSoga, get 2*Solar Panel Connectors.
* This product (portable power supply) can supply power to your device in the temperature range of -10 to 40 degrees Celsius (-10 to 65 degrees Celsius for solar panels). If the operating temperature is outside the above range, this product may not work.
A: Please note that the AC output port can only charge/power devices that operate at less than 300-Watt. Besides, the whole wattage should be under 300 watts as well . Once exceeding, the Explorer 300 will shut off automatically. Please refer to your device specification before purchase.
A: Working time = 293Wh* 0.85 / operating wattage of your device
For reference, assuming power consumption of your device is 30W (might be a box fan), working time will be 293Wh*0.85/30w=8.3hrs (rough calculated) .
Please note: actual power consumption varies from different usages, please consult Jackery for better purchase decision.
A: Yes, you can use the Explorer 300 to charge other things, while it's being recharged at the same time.
Note that the total rated wattage should be under 300W (surge 500W). If the device power is outside this range, the Explorer 300 may shut down.
With the MPPT solar charge controller inside, the Explorer 300 can be charged more efficiently. When paired with a compatible solar panel like the Jackery SolarSaga 100W (sold separately), it can perform as a solar generator. Under full sun, the SolarSaga 100W can charge the Explorer 300 in just 3.5 hours from 0-80%.
a. Find the DC interface on the back of SolarSaga 100W;
b. Connect the DC interface of SolarSaga 100W with the DC input of the Explorer 300.
a. Recharging time varies depending on location, temperature, weather, etc. Therefore, the actual recharge time may be different.
b. Keep your portable power station away from heat and direct sunlight to extend its life span during recharging.
Durable, versatile, and compact enough to tote along wherever your weekend takes you. Jackery Explorer 300 is the right portable power station for you when going camping off the grid, out there in the wild or in an emergency situation. It has enough power to run many of your personal electronics such as digital cameras, laptop, drone, mini cooler.
Note that the total rated wattage should be under 300W (surge 500W). If the device power is outside this range, the Explorer 300 may shut down.
With the MPPT solar charge controller inside, the Explorer 300 can be charged more efficiently. When paired with a compatible solar panel like the Jackery SolarSaga 100W (sold separately), it can perform as a solar generator. Under full sun, the SolarSaga 100W can charge the Explorer 300 in just 3.5 hours from 0-80%.
1.Find the DC interface on the back of SolarSaga 100W;
2.Connect the DC interface of SolarSaga 100W with the DC input of the Explorer 300.
b. Recharging time varies depending on location, temperature, weather, etc. Therefore, the actual recharge time may be different.
c. Keep your portable power station away from heat and direct sunlight to extend its life span during recharging.
Durable, versatile, and compact enough to tote along wherever your weekend takes you. The Jackery Explorer 300 is the right portable power station for you when camping off the grid or in an emergency. It has enough power to run many of your personal electronics such as digital cameras, laptops, drones, mini cooler, and more.
Capacity:
Cell Chemistry:
Lifecycle:
Management System:
293Wh (14.4V, 20.4Ah)
Li-ion NMC
500 cycles to 80%+ capacity
BMS, Over Voltage Protection, Short Circuit Protection
AC Output:
USB-A Output:
Quick Charge 3.0 Output:
USB-C PD Output:
Car Output:
DC Input:
110VAC, 60Hz, 300W (500W Surge)
5V, 2.4A
5-6.5V, 3A / 6.5-9V, 2A / 9-12V, 1.5A
5V, 9V, 15V, 20V, 3A
12V, 10A
12V-30V (90W Max)
AC Adapter:
12V Car Adaptor:
SolarSaga 100W Solar Panel:
USB-C PD:
4.5 Hours
5 Hours
5 Hours
5.5 Hours
Weight:
Dimensions (LxWxD):
Operating Usage Temperature:
Certification
Warranty:
Optional Accessory:
7.1 lbs (3.2 kg)
9.1 x 5.2 x 7.8 in (23 x 13.3 x 19.9 cm)
14-104F (-10-40℃)
CEC, DOE, FCC, QC3.0, ROHS, CA Prop 65
24 Months
Capacity: 293Wh (14.4V, 20.4Ah)
Cell Chemistry: Li-ion NMC
Lifecycle: 500 cycles to 80%+ capacity
Management System: BMS, Over Voltage Protection, Short Circuit Protection
AC Output: 110VAC, 60Hz, 300W (500W Surge)
USB-A Output: 5V, 2.4A
Quick Charge 3.0 Output: 5-6.5V, 3A / 6.5-9V, 2A / 9-12V, 1.5A
USB-C PD Output: 5V, 9V, 15V, 20V, 3A
Car Output: 12V, 10A
DC Input: 12V-30V (90W Max)
AC Adapter: 4.5 Hours
12V Car Adaptor: 5 Hours
SolarSaga 100W Solar Panel: 5 Hours
USB-C PD 5.5 Hours
Weight: 7.1 lbs (3.2 kg)
Dimensions (LxWxD): 9.1 x 5.2 x 7.8 in (23 x 2313.3 x 19.9 cm)
Warranty: 24 Months
Certification: CEC, DOE, FCC, QC3.0, ROHS, CA Prop 65
Operating Usage Temperature: 14-104F (-10-40℃)
Optional Accessory: Jackery SolarSaga 100W Solar Panel
A: Please note that the AC output port can only charge/power devices that operate at less than 300-Watt. Besides, the whole wattage should be under 300 watts as well . Once exceeding, the Explorer 300 will shut off automatically. Please refer to your device specification before purchase.
A: Working time = 293Wh* 0.85 / operating wattage of your device
For reference, assuming power consumption of your device is 30W (might be a box fan), working time will be 293Wh*0.85/30w=8.3hrs (rough calculated) .
Please note: actual power consumption varies from different usages, please consult Jackery for better purchase decision.
A: Yes, you can use the Explorer 300 to charge other things, while it's being recharged at the same time.
